H3C路由器如何清楚密码？
以下分不同的版本来说明：
AR路由器BOOTROM9.07清除CONSOLE密码:
Press Ctrl-B to enter Boot Menu Please input Bootrom password: Boot Menu: 1: Download application program with XMODEM 2: Download application program with NET 3: Set application file type 4: Display applications in Flash 5: Clear application password 6: Start up and ignore configuration 7: Enter debugging environment 8: Boot Rom Operation Menu 9: Do not check the version of the software a: Exit and reboot Enter your choice(1-a): 选择5后选择a重启路由器 BOOTROM9.06 Boot Menu: 1: Download application program with XMODEM 2: Download application program with NET 3: Clear application password 4: Start up and ignore configuration 5: Enter debugging environment 6: Boot Rom Operation Menu 7: Do not check the version of the software 8: Exit and reboot Enter your choice(1-8): 选择3然后再选择8重启路由器 BOOTROM7.06
Boot Menu: 1: Download application program with XMODEM 2: Download application program with NET 3: Clear application password 4: Start up and ignore configuration 5: Enter debugging environment 6: Boot Rom Operation Menu 7: Do not check the version of the software 8: Exit and reboot Enter your choice(1-8): 选3后选8重启路由器 BOOTROM5.28 Press Ctrl-B to enter Boot Menu Please input Boot ROM password: Boot Menu: 1: Download application program with XMODEM 2: Download application program with NET 3: Clear configuration 4: Start up and ignore configuration 5: Boot ROM Operation Menu 6: Do not check the version of the software 7: Exit and reboot Enter your choice(1-7): 选3会清除配置,选4会忽略配置以出厂设置启动 启运完毕后将路由器配置DOWN下后更改密码后再导入 BOOTROM5.1
Press Ctrl-B to enter Boot Menu Please input Bootrom password: Boot Menu: 1: Download application program 2: Download Bootrom program 3: Modify Bootrom password 4: Exit the menu 5: Reboot Enter your choice(1-5): 按ctrl+p后再选择5来清除密码 忽略配置清除密码再导入配置步聚 本文出自 51CTO.COM技术博客1、重新配置路由器的以太网口地址 [Router-Ethernet1]ip address 192.168.1.1 255.255.255.0 2、保证PC与路由器的以太网口能够互通 3、在路由器上配置一个FTP帐号用来从PC中DOWN配置 [Router]local-user ftp password sim ftp ftp-directory flash:/ 4、启动路由器上的FTP服务 [Router]ftp-server enable 4、PC的运行栏中输入CMD FTP 192.168.1.1 输入用户名ftp密码ftp hash lcd c:\ 指定下载后的配置文件目录 get config 然后用写字本或记事本打开更改密码后再put上去 注意：上传以后不需要再保存配置，若再SAVE配置，则上传的配置会被覆盖。 |
51cisco
博客统计信息
热门文章
最新评论
友情链接
